AA, AAA цинка углерода батареи 1,5 в сухой батареи aaa r6 um3 сухой батарея
Базовая информация
Модель: R03P, LR03/UM-4/AAA
Описание продукта
1. основную информацию:
Product |
AA,AAA zinc carbon battery 1.5v dry cell battery aaa r6 um3 dry battery |
Chemical System |
Zinc-manganese dioxide (Zn/MnO2) |
Standard |
IEC standard |
Nominal voltage |
1.5 Volts |
Average capacity |
>480 mAh to 0.9 Volts |
Open-circuit voltage |
1.70 Volts |
Closed-circuit voltage |
1.53 Volts |
Diameter |
13.50-14.50MM |
Height |
49.20-50.50MM |
Average weight |
15.00 Grams |
Shelf life |
24 Months |
Battery material |
Manganese dioxide, Zinc, Acetylene black, Grophite powder, Carbon rod, Plating cap, Tinplate bottom etc |
Art. No.
|
Type
|
Nominal Voltage |
Shelf Life (Month) |
Test Conditions |
Discharge Time |
|
IEC Standard(IEC 60085-2:2007) |
tinko |
|||||
kT
|
R6P AA UM-3 |
1.5
|
24
|
20±2°C,3.9ohm, 24h/d, E.P.V. 0.9V |
----- |
≥90 Min |
20±2°C,43ohm, 4h/d, E.P.V. 0.9V |
1620 Min |
≥1740 Min |
контроля качества и производительности:
1) наши батареи изготовлен из высококачественного сырья, которые были осмотрены строго до использования.
2) наших рабочих и техников внимательно смотрел каждый шаг в процессе производства аккумуляторов строго выполняются системы менеджмента качества застраховать каждый аккумулятор до IEC стандарт.
3) наша батарея имеет характеристики высокой емкости, Лонг долговечность, супер герметичным, хорошая производительность непрерывной разгрузки, долгое время периодически разряда, и она имеет скорость низкая снижение потенциала.
продукт процедуры:
1 |
Zinc can |
The zinc can is the negative terminal and anode material |
2 |
Inserting the separator |
The separator and the bottom paper are inserted to prevent battery short-circuit between the positive and the negative electrode. |
3 |
Filling cathode material |
The mixture of manganese dioxide, electrolyte and others are filled as the cathode material |
4 |
Inserting carbon rod |
The carbon rod for collecting electricity is inserted into the middle of the battery |
5 |
Sealing |
The plastic gasket for sealing is fitted to prevent leakage and water evaporation |
6 |
Fitting tinplate bottom and metal jacket |
The tinplate bottom and washer are placed on the bottom of zinc can and covered by metal jacket |
7 |
Finished product |
The finished battery is packed by shrink after inspecting on its voltage, current and appearance |
Группа Продуктов : Супер тяжелая обязанность аккумулятор / батарея хлорида цинка